 |
bearing for mining |
10,22,2016 |
|
bearing in mining |
10,22,2016 |
|
bearing of mining |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum pulley |
10,21,2016 |
|
bearing for mining pulley |
10,21,2016 |
|
| Current Location：Home
- News |
Preparation of the rolling bearing before installation
|
| Time：2016.10.21 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Similar to the application of oil filing in addition to plants, depression touch marks, rust, and use fine sandpaper light, and such as cleaning up liquid particles, dirt and so on. Roller accessories
(1) Prior to the bearing assembly, it is advisable to review the machining quality of the shaft and seat and the associated machine (eg, precision, shape precision, nominal roughness, etc.) with the appropriate measuring machine according to the technical request rule on the design drawings.
(2) Disassembly of the shaft and seat hole If there is, in the name of bruise, a plant, a rust or a liquid particle such as abrasive dust, sand, clay, etc., not only make the bearing device difficult and the device position inaccurate, Such as falling into the bearing will play a role in grinding, when the bearings will wear or bruise bearing bearing the name of the task, because the device must be carefully reviewed in advance, if found to have the above shortcomings should be corrected. After cleaning up, should wear a film fist glove will be placed in the task of bearing the stage clean cloth or paper soaked.
(3) the name should be removed with a clean gasoline, kerosene, toluene or xylene and other filtrate clean and dry with a clean cloth, and then coated with a thin layer of smooth oil, so that the device can be more convenient operation.
(4) Pro assembly turned over the bearing package, it will be immersed in the gasoline and other solid in the hands to gently slow rotation, to protect the cage, Gulu body and the raceway of the name of the package oil is completely cleaned up.
(5) cleaning up a small amount of bearings, the first measurement of 90 ~ 100 ℃ with hot hot oil to make the oil pouring condensate, with no front and no debris off the machine to dig all the old oil, then shower hot seconds , And then developed with butter to butter, and then cleaned up again with gasoline again.
(6) Note that with sealed bearings do not use this method of cleaning, sealing the outside should be maintained as is not cleaned.
|
|
|
