 |
bearing for mining |
10,22,2016 |
|
bearing in mining |
10,22,2016 |
|
bearing of mining |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum pulley |
10,21,2016 |
|
bearing for mining pulley |
10,21,2016 |
|
| Current Location：Home
- News |
Tapered roller bearings for the sharing of bearing installation knowledge
|
| Time：2016.10.18 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Focusing on tapered roller bearings R & D and manufacturing more than 18 years, always adhere to the "quality-oriented, customer first" business philosophy, product by new and old customers alike. The following is to share knowledge of bearing installation, we want to help.
1. Before installing the bearings on the shaft, you must unplug the bearing pins from the bearing housing and smooth and clean the surface of the journal. Grease and lubricate the journal (allow the bearing to rotate slightly on the shaft).
2. Lubricate the bearing seat and the bearing surface, and put the bearing into the bearing seat. Then, put the assembled bearing on the shaft together with the bearing seat. Push to the desired location for installation.
3. Fixed bearing bolts do not tighten, let the bearing housing can rotate in the bearing housing. The same shaft mounted on the other end of the same bearing and seat, the shaft rotation a few laps, so that the bearing itself automatically align the position, and then bolted the bearing bolt.
4. Eccentric sleeve. First condom eccentric eccentric steps in the bearing sleeve, and hand along the direction of the rotating shaft and tighten. And then insert or withstand a small iron bar eccentric sleeve Shen hole. Hand hammer along the axis of the rotation direction of the small iron bar. So that eccentric sleeve installed firmly, and finally locking the eccentric sleeve of the hexagonal screws.
|
|
|
